GALVANISED FITTINGS – NO THREADING REQUIRED
BS standard pitch thread 1.5mm. A no-threading alternative for installing galvanised steel conduit.
An alternative way to install galvanised steel conduit with no threading! Install galvanised steel conduit faster with the adaptors from Firstflex cables. Reduction in tooling and threading time. Tested and approved to AS/NZS 2053:7
INSTRUCTIONS:
1. Cut conduit to required length.
2. Wipe surfaces to be joined.
3. Apply recommended MTA001 adhesive to the outer surface of the conduit (Permabond A1046 / Loctite 510/638 or equivalent).
4. Adaptors may be pressed onto the conduit by hand, or tapped on. Ensure that the conduit passes the dimple – this maintains a constant earth.
5. Job complete!
