X BOARD XB300 universal profi-cable roller complete set – with multifunction mandrel and system case.
Loadable up to 300kg
The compact XB300 Cable roller is a universal cable winder/unwinder for all small to medium cable reels. The XB300 Cable roller impresses with its small, light and flat design, but can still be loaded up to 300 kg. Especially suitable for damaged cable drums. It enables trouble-free and rational working without tangled cables. 6 rubberized feet ensure a non-slip and stable base. Optimal for protecting surfaces for already finished floor coverings.
The multifunction mandrel has been specially developed for XB300, XB500 and XB500T cable rolling systems. Loose cable bundles can also be rolled by attaching them to the stainless-steel center mandrel and then folding out the 4 side brackets. The telescopic center mandrel measures 72 mm in diameter. It is therefore also ideal for rolling a thinner cable bundle with a small inner diameter or individual wires. The normal height of the multifunction mandrel is 196 mm, which can be extended up to max. 294 mm via the telescopic mechanism. This means high cable bundles or corresponding tube bundles can also be rolled. When the 4 side brackets are unfolded, there is a total contact surface of 430 mm in diameter. Ideally, this should correspond to the respective cable or tube bundle. A designated opening allows the unit to be combined with the RUNPOSTICKS.
Optimum area of application: Rolling of (damaged) drums up to 300 kg as well as loose cable bundles or individual wires up to a max. height of 294 mm and a max. diameter of 430 mm
